LCD MONITOR TOUCH PANEL DRIVER 2 for Mac Version 2.2
Transcript Of LCD MONITOR TOUCH PANEL DRIVER 2 for Mac Version 2.2
LCD MONITOR
TOUCH PANEL DRIVER 2 OPERATION MANUAL
for Mac
Version 2.2
Contents
Introduction................................................................................................................................................................................3 Setting up the Computer...........................................................................................................................................................4
Install......................................................................................................................................................................................4 How to configure settings.........................................................................................................................................................5 Touch Panel Settings.................................................................................................................................................................7
Touch Operation Mode Setting...............................................................................................................................................7 Multi Touch Panel Setting.......................................................................................................................................................8 Calibration..............................................................................................................................................................................9 Touch Pen Settings..................................................................................................................................................................10 Registering(pairing)/unregistering an active pen..................................................................................................................10 Change the active pen settings............................................................................................................................................11 Changing the shape or color of the pointer icon..................................................................................................................15 Uninstall....................................................................................................................................................................................16 Touch Action............................................................................................................................................................................17
Important Information
• This software has been shipped after strict quality control and product inspection. If, however, you find any failure or malfunction, contact your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
• The contents or details may vary depending on the screen configuration and OS version, etc. • This manual does not contain basic operating instructions for Mac OS and macOS.
Trademarks
• Apple, Mac, Mac OS and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. • All other brand and product names are trademarks or registered trademarks of their respective holders.
E2
Introduction
The touch panel driver 2 is a program that enables you to use the touch panel to operate the computer that is connected to the video input terminal of an applicable model. To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver 2 must be installed on the computer. For the system requirements of the touch panel driver 2, such as applicable models and compatible operating systems, see Readme English.pdf. The touch pen that is included with some applicable models is referred to in this manual as “active pen”. For the applicable models, see Readme English.pdf.
TIPS • Depending on the application software, touch operation may not be possible (for example, if the application processes mouse
and other operations independently). Caution • Two or more active pens cannot be used at once. (Excluding the pointer function)
3E
Setting up the Computer
Install
Caution • To install, an administrator name (user name) and password are required. • If an older version of the touch panel driver 2 is installed, remove (uninstall) the old version before installing the touch panel
driver 2. (See page 16.) • Do not touch the touch panel when connecting the USB cable.
If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable. 1. Start the computer. 2. Exit all applications that are running. 3. Connect the touch panel to the computer with a USB cable.
To connect the touch panel, see the manual for the LCD monitor. 4. Double-click the setup program.
\TouchPanel\Mac\SharpTouchPanel2.pkg 5. Click “Continue”.
Follow the on-screen instructions to install the driver. • If a screen prompting you to enter the name and password appears, enter the name and password of the administrator
and click “Install Software” (or “OK”). • If the “When this software finishes installing, you must restart your computer. Are you sure you want to install the software
now?” screen appears, click “Continue Installation”. 6. When the installation finished screen appears, click “Restart”. This completes the installation of the touch panel driver 2. Each time the computer is started, the touch panel driver 2 will start automatically to enable the touch panel to be used.
E4
How to configure settings
Configuring settings from the menu bar
The touch panel driver 2 starts automatically and the icon (
) appears on the menu bar.
1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
Touch Panel Device Shows the connected monitor.
Touch Panel Settings
Touch Operation Mode Setting: Shows the current touch operation mode. To change the touch operation mode, click this
part. (See page 7.)
Multi Touch Panel Setting:
See page 8. (Only when 2 touch panels are connected.)
Calibration:
See page 9.
Touch Pen Settings Shows information on registered active pens (registration number, connection status, signal strength, battery level). You can click an active pen to change its settings. (See page 11.) To register a new active pen, click “Touch pen registration”. (See page 10.)
Version Information Shows the model name of the connected monitor, the version of this software, and other information.
TIPS
• If an active pen is not used for 1 minute, it will enter sleep mode. When the active pen is used, it will automatically wake.
• When an active pen is in sleep mode, the battery level and signal strength will not be shown correctly. After the pen wakes, it will take time for the battery level and signal strength to be shown correctly.
• When an active pen is in sleep mode, the active pen settings cannot be configured. • It may not be possible to configure the active pen settings while continuously pressing the pen tip or function buttons.
5E
How to configure settings
Configuring settings from System Preferences
1. Click “System Preferences” from the Apple menu ( ). 2. Click “SharpTouchPanel2”( ). 3. Click the menu and select settings.
Menu
TIPS
• If the “Show icon on the menu bar” checkmark is removed, the SharpTouchPanel2 icon ( ) does not appear on the menu bar.
• When this software is launched, an icon appears on the menu bar. The icons that appear on the menu bar vary depending on the status of the touch panel and touch pen adapter.
Icon
Touch panel
Touch pen adapter
Not connected
Not connected
Connected
Not connected
Not connected
Connected
Connected
Connected
E6
Touch Panel Settings
1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
Touch Operation Mode Setting
Touch Operation Mode Setting
Select operation mode of the touch panel. Standard Touch Mode: The touch action takes place when the screen is touched by active pen or finger. Pen dedicated Mode: The touch action takes place only when the screen is touched by active pen. The touch action does not takes place when the screen is touched by finger.
7E
Touch Panel Settings
nGestures setting
Select the touch action (see page 17) to be used.
Touch actions that are followed with a desired action.
mark have multiple actions that can be used. Click a touch action and selected the
Multi Touch Panel Setting
If 2 touch panels are connected at the same time, specify which USB connection is connected to which display.
(1)
1. Touch the touch panel and check the USB that is connected to the touch panel. A red frame appears around the USB icon in (1) above.
2. Drag the USB icon with the red frame on screen (1) to the corresponding monitor. TIPS
• This can be set only when the model supports multi-screen.
E8
Touch Panel Settings
Calibration
If black bands appear at the top and bottom or left and right of the screen, perform position adjustment so that the mouse cursor correctly moves to the point that is touched. * If black bands appear both at the top and bottom and at the left and right, the touch position is not correct. In this case, change
the display.
nDevice Information
Select the model to be calibrated.
nCalibration Method
Execute calibration of the selected model. Auto If black bands appear on the screen, position adjustment is automatically performed. Select “Auto” and click on “Apply”. Manual If the automatically adjusted touch position is not correct, perform manual calibration. The PN-L series and PN-C series have different calibration methods. • PN-L series
Enter the display resolution (Width, Height) and click “Apply”. To check the monitor resolution, see the manual for the LCD monitor. • PN-C series When you click “Apply”, a setting screen appears. (4-point touch screen) Follow the instructions on the screen. To cancel, press the [ESC] key on the keyboard.
9E
Touch Pen Settings
Register, delete or configure an active pen. To configure the settings, the touch pen adapter that has the active pen registered must be connected.
Registering(pairing)/unregistering an active pen
Up to 4 active pens can be used simultaneously when using the pointer function. To use the optional active pen, you must register the active pen (pairing). The maximum number that can be registered depends on the LCD monitor. For details, see Readme English.pdf. You can also cancel the registration of an active pen.
Registering an active pen
Perform active pen pairing for one pen at a time. 1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
2. Click “Touch pen registration” in the “Touch pen settings”.
3. Click “Registration”. 4. Simultaneously hold down function button 1 and function button 3 of the active pen being paired.
Continue pressing the buttons until pairing is completed. A message appears after completion of pairing. 5. Click “OK”. TIPS • Pairing may not be possible if there is another touch pen adapter nearby. In this event, turn off the power of the monitor that uses the nearby touch pen adapter. • One touch pen cannot be registered in multiple touch pen adapters.
E 10
TOUCH PANEL DRIVER 2 OPERATION MANUAL
for Mac
Version 2.2
Contents
Introduction................................................................................................................................................................................3 Setting up the Computer...........................................................................................................................................................4
Install......................................................................................................................................................................................4 How to configure settings.........................................................................................................................................................5 Touch Panel Settings.................................................................................................................................................................7
Touch Operation Mode Setting...............................................................................................................................................7 Multi Touch Panel Setting.......................................................................................................................................................8 Calibration..............................................................................................................................................................................9 Touch Pen Settings..................................................................................................................................................................10 Registering(pairing)/unregistering an active pen..................................................................................................................10 Change the active pen settings............................................................................................................................................11 Changing the shape or color of the pointer icon..................................................................................................................15 Uninstall....................................................................................................................................................................................16 Touch Action............................................................................................................................................................................17
Important Information
• This software has been shipped after strict quality control and product inspection. If, however, you find any failure or malfunction, contact your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
• The contents or details may vary depending on the screen configuration and OS version, etc. • This manual does not contain basic operating instructions for Mac OS and macOS.
Trademarks
• Apple, Mac, Mac OS and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. • All other brand and product names are trademarks or registered trademarks of their respective holders.
E2
Introduction
The touch panel driver 2 is a program that enables you to use the touch panel to operate the computer that is connected to the video input terminal of an applicable model. To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver 2 must be installed on the computer. For the system requirements of the touch panel driver 2, such as applicable models and compatible operating systems, see Readme English.pdf. The touch pen that is included with some applicable models is referred to in this manual as “active pen”. For the applicable models, see Readme English.pdf.
TIPS • Depending on the application software, touch operation may not be possible (for example, if the application processes mouse
and other operations independently). Caution • Two or more active pens cannot be used at once. (Excluding the pointer function)
3E
Setting up the Computer
Install
Caution • To install, an administrator name (user name) and password are required. • If an older version of the touch panel driver 2 is installed, remove (uninstall) the old version before installing the touch panel
driver 2. (See page 16.) • Do not touch the touch panel when connecting the USB cable.
If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable. 1. Start the computer. 2. Exit all applications that are running. 3. Connect the touch panel to the computer with a USB cable.
To connect the touch panel, see the manual for the LCD monitor. 4. Double-click the setup program.
\TouchPanel\Mac\SharpTouchPanel2.pkg 5. Click “Continue”.
Follow the on-screen instructions to install the driver. • If a screen prompting you to enter the name and password appears, enter the name and password of the administrator
and click “Install Software” (or “OK”). • If the “When this software finishes installing, you must restart your computer. Are you sure you want to install the software
now?” screen appears, click “Continue Installation”. 6. When the installation finished screen appears, click “Restart”. This completes the installation of the touch panel driver 2. Each time the computer is started, the touch panel driver 2 will start automatically to enable the touch panel to be used.
E4
How to configure settings
Configuring settings from the menu bar
The touch panel driver 2 starts automatically and the icon (
) appears on the menu bar.
1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
Touch Panel Device Shows the connected monitor.
Touch Panel Settings
Touch Operation Mode Setting: Shows the current touch operation mode. To change the touch operation mode, click this
part. (See page 7.)
Multi Touch Panel Setting:
See page 8. (Only when 2 touch panels are connected.)
Calibration:
See page 9.
Touch Pen Settings Shows information on registered active pens (registration number, connection status, signal strength, battery level). You can click an active pen to change its settings. (See page 11.) To register a new active pen, click “Touch pen registration”. (See page 10.)
Version Information Shows the model name of the connected monitor, the version of this software, and other information.
TIPS
• If an active pen is not used for 1 minute, it will enter sleep mode. When the active pen is used, it will automatically wake.
• When an active pen is in sleep mode, the battery level and signal strength will not be shown correctly. After the pen wakes, it will take time for the battery level and signal strength to be shown correctly.
• When an active pen is in sleep mode, the active pen settings cannot be configured. • It may not be possible to configure the active pen settings while continuously pressing the pen tip or function buttons.
5E
How to configure settings
Configuring settings from System Preferences
1. Click “System Preferences” from the Apple menu ( ). 2. Click “SharpTouchPanel2”( ). 3. Click the menu and select settings.
Menu
TIPS
• If the “Show icon on the menu bar” checkmark is removed, the SharpTouchPanel2 icon ( ) does not appear on the menu bar.
• When this software is launched, an icon appears on the menu bar. The icons that appear on the menu bar vary depending on the status of the touch panel and touch pen adapter.
Icon
Touch panel
Touch pen adapter
Not connected
Not connected
Connected
Not connected
Not connected
Connected
Connected
Connected
E6
Touch Panel Settings
1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
Touch Operation Mode Setting
Touch Operation Mode Setting
Select operation mode of the touch panel. Standard Touch Mode: The touch action takes place when the screen is touched by active pen or finger. Pen dedicated Mode: The touch action takes place only when the screen is touched by active pen. The touch action does not takes place when the screen is touched by finger.
7E
Touch Panel Settings
nGestures setting
Select the touch action (see page 17) to be used.
Touch actions that are followed with a desired action.
mark have multiple actions that can be used. Click a touch action and selected the
Multi Touch Panel Setting
If 2 touch panels are connected at the same time, specify which USB connection is connected to which display.
(1)
1. Touch the touch panel and check the USB that is connected to the touch panel. A red frame appears around the USB icon in (1) above.
2. Drag the USB icon with the red frame on screen (1) to the corresponding monitor. TIPS
• This can be set only when the model supports multi-screen.
E8
Touch Panel Settings
Calibration
If black bands appear at the top and bottom or left and right of the screen, perform position adjustment so that the mouse cursor correctly moves to the point that is touched. * If black bands appear both at the top and bottom and at the left and right, the touch position is not correct. In this case, change
the display.
nDevice Information
Select the model to be calibrated.
nCalibration Method
Execute calibration of the selected model. Auto If black bands appear on the screen, position adjustment is automatically performed. Select “Auto” and click on “Apply”. Manual If the automatically adjusted touch position is not correct, perform manual calibration. The PN-L series and PN-C series have different calibration methods. • PN-L series
Enter the display resolution (Width, Height) and click “Apply”. To check the monitor resolution, see the manual for the LCD monitor. • PN-C series When you click “Apply”, a setting screen appears. (4-point touch screen) Follow the instructions on the screen. To cancel, press the [ESC] key on the keyboard.
9E
Touch Pen Settings
Register, delete or configure an active pen. To configure the settings, the touch pen adapter that has the active pen registered must be connected.
Registering(pairing)/unregistering an active pen
Up to 4 active pens can be used simultaneously when using the pointer function. To use the optional active pen, you must register the active pen (pairing). The maximum number that can be registered depends on the LCD monitor. For details, see Readme English.pdf. You can also cancel the registration of an active pen.
Registering an active pen
Perform active pen pairing for one pen at a time. 1. Click the SharpTouchPanel2 icon ( ) on the menu bar.
2. Click “Touch pen registration” in the “Touch pen settings”.
3. Click “Registration”. 4. Simultaneously hold down function button 1 and function button 3 of the active pen being paired.
Continue pressing the buttons until pairing is completed. A message appears after completion of pairing. 5. Click “OK”. TIPS • Pairing may not be possible if there is another touch pen adapter nearby. In this event, turn off the power of the monitor that uses the nearby touch pen adapter. • One touch pen cannot be registered in multiple touch pen adapters.
E 10